Big mistake in CC3D

Started by yopknopixx

Newb problems

Started by JasonR

can i upgrade the ublox chip on the v9 gps to an M8N?

Started by Thrasher

Can Not Connected to CC3D

Started by makkuzu

Newbie problem - quads dance like ballerina's!

Started by QC102

OSD and Revo Nano / CC3D

Started by blvdbuzzard

Quanum outlaw 270 setup issue

Started by Mathew

[SOLVED]CC3D throttle problem way too high to start with

Started by youthreewire « 1 2 »

Telemetry host ip address?

Started by yutsin1301

Help! orange input flag-cannot arm.

Started by Seven5555 « 1 2 »

Cannot detect PPM receiver on SP racing F3

Started by napo7

Help needed flashing SP racing F3

Started by napo7 « 1 2 »

Need help with Broken USB Connector

Started by Sushmit

Oneshot 125 with PWM receiver

Started by robertr

CC3D BOOT ERRORS

Started by JHBDrones

Need to replace micro USB port

Started by MikeNH

-Will a 90C lipo replace my 70C (BFight 210)

Started by Lando

no board communication with win 10 but ok win 7 (only via usb)

Started by ppnvedado

Using GCSReceiver via UAVTalk to control thrust

Started by jmyth742

new to blheli - concept explanation

Started by hilarious