How to return to default workspaces of program

Started by kazmod1

My Kingkong is uncontrollable after the upgrade of firmware of flight controller

Started by SAkkiE

Tarot retractable legs

Started by QC102

Revo Mini @ Netherlands near Eindhoven, help needed

Started by rcbsimoes

Able to arm quad in all flight modes.

Started by robertr

Turning CC3D axis =/- 90degrees.

Started by QC102

Quads as assassination weapons: More regulations ahead? Real or not?

Started by TheOtherCliff

cc3d atom mini 3.3v for connecting BMP180 baro

Started by sim_tcr

Revolution board help

Started by bterrier

Problem with the engines speed

Started by Francis « 1 2 »

Librepilot help

Started by exileneb « 1 2 »

"Stack: critical ... module memory allocation being exceeded" in flight data

Started by tol76geg84

The best antennas for 433mhz

Started by TheOtherCliff

cc3d in bootloader mode + unrecognized usb in my computer

Started by coolt5

Motors keep spinning when testing Failsafe.

Started by robertr

[SOLVED] HMC5883L not connecting via I2C

Started by Bluebird

Installing CC3D

Started by xmarkx

Revo onboard MAG very strange values (with GPS Neo6M)

Started by janban

Calibration of esc

Started by jameswattsjr

Favourite LittleBee Spring 30A Mini Brushless ESC

Started by zukenj