QC102

  • **
  • 80
Turning CC3D axis =/- 90degrees.
« on: August 06, 2018, 02:08:52 am »
Shame faced I have to admit - I have to admit I cannot fined the way I used to "realign" my CC3D FC's to give better access to teh USB port...after taking a sabbatical  for over 12 months on quad flying. Now I am updating and re- tuning 6 various sized quads - all using CC3D FC.

Advice and re-education please :(

Re: Turning CC3D axis =/- 90degrees.
« Reply #1 on: August 06, 2018, 02:55:09 am »
You remount and rotate it +-90 or 180 to get the port where you want it, then use Attitude->RotateVirtual to tell the configuration that you rotated it.

https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/2818092/CC+Attitude+Configuration

QC102

  • **
  • 80
Re: Turning CC3D axis =/- 90degrees.
« Reply #2 on: August 10, 2018, 03:35:20 am »
Thanks..... sorted.