LibrePilot Forum

General Category => General Discussion => Topic started by: QC102 on August 06, 2018, 02:08:52 am

Title: Turning CC3D axis =/- 90degrees.
Post by: QC102 on August 06, 2018, 02:08:52 am
Shame faced I have to admit - I have to admit I cannot fined the way I used to "realign" my CC3D FC's to give better access to teh USB port...after taking a sabbatical  for over 12 months on quad flying. Now I am updating and re- tuning 6 various sized quads - all using CC3D FC.

Advice and re-education please :(
Title: Re: Turning CC3D axis =/- 90degrees.
Post by: TheOtherCliff on August 06, 2018, 02:55:09 am
You remount and rotate it +-90 or 180 to get the port where you want it, then use Attitude->RotateVirtual to tell the configuration that you rotated it.

https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/2818092/CC+Attitude+Configuration
Title: Re: Turning CC3D axis =/- 90degrees.
Post by: QC102 on August 10, 2018, 03:35:20 am
Thanks..... sorted.