Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #60 on: December 03, 2016, 10:38:15 am »
Okay flashed the firmware and looked at I2CStats...there seems to be no failure after waiting 5 Minutes or after hitting save in Attitude tab...
I made 2 videos so that you can exactly see what i mean...



Here you see that saving doesnt work in Attitude tab but in Input (and all other tabs). Dont matter if i use USB or OPLink. Lipo is connected. Mag has power.
And you see that I2C stats are okay...



In the second you see that saving works under System tab.


Can i use the firmware for flying? Or whats the difference between 16.09 RC2 and the one in the link?


« Last Edit: December 03, 2016, 10:49:33 am by DocHardinger »
Hardware: F450 Frame--Revolution Board--EMax 2213-935kv--BullTec 30A Opto--5000mAh 3S 30C LiPo--NEO M8N GPS+MAG--Fr Sky Taranis Plus + OPLink Mini
Addon: sj5000x + two axis gimbal + minimosd + eachine VT + easycap
Software: Black Rhino, LP2GO

f5soh

  • *****
  • 4529
    • LibrePilot
Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #61 on: December 03, 2016, 11:28:55 am »
Difficult to see where the issue is since i cannot reproduce here.



Quote
Can i use the firmware for flying? Or whats the difference between 16.09 RC2 and the one in the link?

The one i posted output I2c stats, that the only difference.

Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #62 on: December 03, 2016, 01:33:58 pm »
Hmm okay.. anyway mag and everything else is working fine...so as long as i remember to save at system tab everything is fine...thx for your help
Hardware: F450 Frame--Revolution Board--EMax 2213-935kv--BullTec 30A Opto--5000mAh 3S 30C LiPo--NEO M8N GPS+MAG--Fr Sky Taranis Plus + OPLink Mini
Addon: sj5000x + two axis gimbal + minimosd + eachine VT + easycap
Software: Black Rhino, LP2GO

hwh

  • *
  • 1018
Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #63 on: December 13, 2016, 04:02:17 am »
16.09 RC2 has now been replaced by the final release version of 16.09   :)

https://librepilot.atlassian.net/wiki/display/LPDOC/Downloads

ggrif

  • *
  • 178
Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #64 on: December 13, 2016, 06:14:58 pm »
16.09 RC2 has now been replaced by the final release version of 16.09   :)

https://librepilot.atlassian.net/wiki/display/LPDOC/Downloads
Pretty low key announcement I think.  Thanks all! 

hwh

  • *
  • 1018
Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #65 on: December 13, 2016, 08:01:11 pm »
The actual announcement is in the news section, I just figured I'd post that note here for anyone that missed it.  :)

If you start any version of GCS the welcome page also has the announcement.

ggrif

  • *
  • 178
Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #66 on: December 15, 2016, 04:13:58 pm »
LOL, I rarely look at the "News" topic.

f5soh

  • *****
  • 4529
    • LibrePilot
Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #67 on: December 15, 2016, 07:01:16 pm »
You can also see the News posts every time you start GCS :)






Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #68 on: March 12, 2017, 04:16:25 pm »
hi
getting this error when trying to install new version,

Output folder: C:\Program Files (x86)\LibrePilot\bin
Can't write: C:\Program Files (x86)\LibrePilot\bin\Aggregation.dll

filnet

  • *****
  • 113
Re: Release Candidate - 16.09 RC2 Now available for testing
« Reply #69 on: March 12, 2017, 04:19:44 pm »
@cc3dbeast, make sure LibrePilot GCS is not running when upgrading or try to install the new version right after a reboot.
If the problem persists, try to uninstall first.

Did you install the previous version with another user ?
« Last Edit: March 12, 2017, 04:42:33 pm by filnet »