« previous next »
Pages: [1]
*

vk4tec

  • *
  • 28
DJI Inspire 1 ground station
« on: January 09, 2017, 12:51:54 pm »
Hello

Need a hand please

I want to run a tack on solution for my DJI Inspire 1

Can I run a CC3D and OPLINK to just get GPS GYRO and ACCELL ?

I want a laptop to show the position and angle of the bird

Andrew

[email protected]
Logged
*

hwh

  • *
  • 1018
Re: DJI Inspire 1 ground station
« Reply #1 on: January 09, 2017, 06:03:28 pm »
It seems like a waste but you can.   If you put one on the quad with an oplink it will send telemetry to GCS even if it's not controlling the bird.  If I were going to do it I'd probably use a revolution board since it has the oplink built in.  Or one of the Chinese mini-revolutions with what the Chinese are calling oplink-air.  Either way it would be smaller than a cc3d and external oplink.
Logged
*

vk4tec

  • *
  • 28
Re: DJI Inspire 1 ground station
« Reply #2 on: January 10, 2017, 01:41:12 pm »
What is a good gps to get ? Do I need one with a compass built in ?

Andrew
Logged
*

TheOtherCliff

  • *****
  • 4304
Re: DJI Inspire 1 ground station
« Reply #3 on: January 11, 2017, 08:31:10 pm »
Without a compass, the yaw gyro will drift and you won't know whether the roll you see is really a pitch...

Compass use needs Revo class of FC even for just viewing IIRC.
Logged
Pages: [1]
« previous next »