« previous next »
Pages: [1]
*

zukenj

  • ***
  • 202
OneShot125 enable motors move
« on: March 30, 2016, 06:01:29 am »
Hello,

When I enable OneShot125 cause motor to spin intermittent.

See the video please:






Any suggestion will be appreciated.
« Last Edit: March 30, 2016, 06:25:59 am by zukenj »
Logged
FS-TH9X RC
F450 Clone
Revolution FC
EMAX 2213 935 KV
HK 30A ESC UBEC running BLHeli 14.4
10x4.5 Propellers
DJI Naza clone Ublox M8N GPS
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: OneShot125 enable motors move
« Reply #1 on: March 30, 2016, 10:27:13 am »
What esc are you using ? Link ?
Logged
*

zukenj

  • ***
  • 202
Re: OneShot125 enable motors move
« Reply #2 on: March 30, 2016, 03:10:09 pm »
« Last Edit: March 30, 2016, 03:14:40 pm by zukenj »
Logged
FS-TH9X RC
F450 Clone
Revolution FC
EMAX 2213 935 KV
HK 30A ESC UBEC running BLHeli 14.4
10x4.5 Propellers
DJI Naza clone Ublox M8N GPS
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: OneShot125 enable motors move
« Reply #3 on: March 30, 2016, 06:36:17 pm »
This esc do not use Simonk or BLHeli firmware, that a normal Esc for planes.

In my opinion the best you can do with this Esc type is PWMSyncr, if works. Never OneShot.
Logged
*

zukenj

  • ***
  • 202
Re: OneShot125 enable motors move
« Reply #4 on: March 30, 2016, 08:40:20 pm »
Ok. I did upload BLHelui, on the ESCs and that make a big difference on the quad.

I will stick with this settings for now.

Thanks
Logged
FS-TH9X RC
F450 Clone
Revolution FC
EMAX 2213 935 KV
HK 30A ESC UBEC running BLHeli 14.4
10x4.5 Propellers
DJI Naza clone Ublox M8N GPS
Pages: [1]
« previous next »