LibrePilot Forum

General Category => General Discussion => Topic started by: zukenj on March 30, 2016, 06:01:29 am

Title: OneShot125 enable motors move
Post by: zukenj on March 30, 2016, 06:01:29 am
Hello,

When I enable OneShot125 cause motor to spin intermittent.

See the video please:

https://youtu.be/KP4JC2GTKL0 (https://youtu.be/KP4JC2GTKL0)




Any suggestion will be appreciated.
Title: Re: OneShot125 enable motors move
Post by: f5soh on March 30, 2016, 10:27:13 am
What esc are you using ? Link ?
Title: Re: OneShot125 enable motors move
Post by: zukenj on March 30, 2016, 03:10:09 pm
I am using:
Hobby King 30A ESC 3A UBEC

http://www.hobbyking.com/hobbyking/store/__70237__Hobby_King_30A_ESC_3A_UBEC_AR_Warehouse_.html (http://www.hobbyking.com/hobbyking/store/__70237__Hobby_King_30A_ESC_3A_UBEC_AR_Warehouse_.html)
Title: Re: OneShot125 enable motors move
Post by: f5soh on March 30, 2016, 06:36:17 pm
This esc do not use Simonk or BLHeli firmware, that a normal Esc for planes.

In my opinion the best you can do with this Esc type is PWMSyncr, if works. Never OneShot.
Title: Re: OneShot125 enable motors move
Post by: zukenj on March 30, 2016, 08:40:20 pm
Ok. I did upload BLHelui, on the ESCs and that make a big difference on the quad.

I will stick with this settings for now.

Thanks