hwh

  • *
  • 1018
Re: Revo AuxMag
« Reply #105 on: April 18, 2016, 03:23:35 am »
If it's positioned correctly in the case.  The mag chip orientation is:

Xviews

  • **
  • 51
Re: Revo AuxMag
« Reply #106 on: April 18, 2016, 09:34:38 am »
same problem like user "heubie" and others with the AuxMag is not recognized with battery power up. Any solution without USB ?

Re: Revo AuxMag
« Reply #107 on: April 18, 2016, 10:19:19 am »
Ok the mag is in the same position of the boardmag i ask the roll pitch yaw value is 0 0 and 0?or i need to change it?.thank you

hwh

  • *
  • 1018
Re: Revo AuxMag
« Reply #108 on: April 18, 2016, 02:57:50 pm »
If the chip is on the top of the board and facing the way the picture shows all the settings for aux mag should be 0.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revo AuxMag
« Reply #109 on: April 18, 2016, 03:45:45 pm »
For users with AuxMag issues, update your build:

git pull and rebuild
You should see "GCS 15.09+r596-g61ce3d6" on top of window.

Go to firmware tab:
- Rescue
- Open firmware you just downloaded from this post
- Flash

Test with a basic Auxmag config using setup wizard if I2C alarm still.

Updated firmware for testing and determine the delay needed

https://forum.librepilot.org/index.php?topic=1110.msg10186#msg10186
« Last Edit: April 18, 2016, 09:47:31 pm by f5soh »

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revo AuxMag
« Reply #110 on: April 18, 2016, 03:50:50 pm »
@Ariele Please post a screenshot of your Magnetometer tab while all values are set to 0, and both mag calibrated and without alarm of course.

Xviews

  • **
  • 51
Re: Revo AuxMag
« Reply #111 on: April 18, 2016, 04:08:10 pm »
Okay thx i will test it :)

Update

Nice its working and windows build working too :) Best day
No Problems with mag :)
For users with AuxMag issues, update your build:

git pull and rebuild
You should see "GCS 15.09+r596-g61ce3d6" on top of window.

Go to firmware tab:
- Rescue
- Open firmware you just downloaded from this post
- Flash

Test with a basic Auxmag config using setup wizard if I2C alarm still.
« Last Edit: April 18, 2016, 05:32:39 pm by Xviews »

Jhinta

  • ***
  • 198
Re: Revo AuxMag
« Reply #112 on: April 18, 2016, 04:55:50 pm »
For users with AuxMag issues, update your build:

git pull and rebuild
You should see "GCS 15.09+r596-g61ce3d6" on top of window.

Go to firmware tab:
- Rescue
- Open firmware you just downloaded from this post
- Flash

Test with a basic Auxmag config using setup wizard if I2C alarm still.

is this the same as the build in firmware or do i need this file?
 ;D just do as told :P
« Last Edit: April 18, 2016, 04:59:18 pm by Jhinta »

Jhinta

  • ***
  • 198
Re: Revo AuxMag
« Reply #113 on: April 18, 2016, 05:46:41 pm »
having problems,  :o
i2c does connect but , my quad doesnt keep its settings ,, like input switchs back to pwm where i have ppm, also random gps and i2c gets disabled

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revo AuxMag
« Reply #114 on: April 18, 2016, 05:49:18 pm »
Be sure the GCS version is GCS 15.09+r596-g61ce3d6

Erase settings

Jhinta

  • ***
  • 198
Re: Revo AuxMag
« Reply #115 on: April 18, 2016, 05:52:28 pm »
it is ,
anyway ,, when connecting bat -> gps/i2c/reciver setting all disable
usb only -> all seems fine.
just strange, seems like a half boot, normal boot , led shoel be blinging like 5 sec then steady , now it is blue 4x slow -> then boot up -> blue -> yello-> blue , etc  slowly

edit , this is random ,,  got it working ,, but it failes more then it fully boots.
« Last Edit: April 18, 2016, 06:03:37 pm by Jhinta »

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revo AuxMag
« Reply #116 on: April 18, 2016, 06:00:03 pm »
Try this one, just in case.

Jhinta

  • ***
  • 198
Re: Revo AuxMag
« Reply #117 on: April 18, 2016, 06:13:26 pm »
Boot error . this is with bat connected . usb only is fine( 10% of the time is good)

Verstuurd vanaf mijn LG-D855 met Tapatalk


Jhinta

  • ***
  • 198
Re: Revo AuxMag
« Reply #118 on: April 18, 2016, 06:15:14 pm »
 :o v1 seem beter in booting

Jhinta

  • ***
  • 198
Re: Revo AuxMag
« Reply #119 on: April 18, 2016, 06:25:03 pm »