[TadyTheFish]

I updated everything... But didn't run -Syuu command... It wasnt stated in the compiling tutorial the qt i have is 5.6.1... So toolate for me i will wait no problem... Can you notifiy us when it is fixed?
Thank you

[parched]

It might not be broken so feel free to try it

[filnet]

a fix for the icu upgrade has been pushed to next.
GCS build should be fine now

[TadyTheFish]

re-built everything... now the CGS compiles without errors ( first time for me so yaaay ) but still i have problems with PFD. I can select in the drop-down menu but it is white... The modelView on the other hand is missing from the drop-down menu...
tried.. build/librepilot-gcs_release/bin/librepilot-gcs.exe /reset .. no luck
i didn't install the build .. i ran it directly...

[f5soh]

Try "-reset" instead of "/reset"

Or File > Import/Export GCS Settings and Reset button

Restart GCS

[TadyTheFish]

Tried to install it... The same problem

[f5soh]

After you run the GCS next for first time you need to reset config.

Go  to File > Import/Export GCS settings and Reset button
Restart GCS

If issue still, try installing with MesaOpenGL driver selected.

[TadyTheFish]

Great! that worked! now i can see everything! thank you. I did these resets before with no luck but this time it worked