Wagsy

  • *
  • 87
    • Rotorpix
Re: Post your Videos!
« Reply #150 on: August 13, 2016, 12:28:30 pm »
Nice and smooth those QAV 400's. Thats what made me want to make my own 400.
Here my QUADI 400 on its first big flight, going to be a epic open country flyer.


and here is the Hexi, both running REVO - HEXI has a NAZA GPS.
« Last Edit: August 14, 2016, 12:17:02 am by Wagsy »

mr_w

  • *
  • 207
    • LibrePilot
Re: Post your Videos!
« Reply #151 on: August 17, 2016, 01:48:55 pm »


2x CC3D 250 size quad, LibrePilot (next)

Little bit of jello, but amount of fun we had that day outweighs all that ;)


Re: Post your Videos!
« Reply #152 on: October 05, 2016, 04:00:06 pm »
Had some urban exploration with my gimbaled copter. Abandoned theme park. Ended with my hexa drowning in the pool sadly. Luckily it looks like after drying the revo and V9 GPS survived. but haven't diagnosed if its completely ok yet.


ernstock

  • ***
  • 137
Re: Post your Videos!
« Reply #153 on: November 01, 2016, 08:10:11 pm »
Had some urban exploration with my gimbaled copter. Abandoned theme park. Ended with my hexa drowning in the pool sadly. Luckily it looks like after drying the revo and V9 GPS survived. but haven't diagnosed if its completely ok yet.

...

Nice work again Zallestial.
Hope your Fpv going ok ?

Here's my offering , very raw and best viewed on small screen maybe.

« Last Edit: November 02, 2016, 12:12:55 am by hwh »

raydal

  • *
  • 11
Re: Post your Videos!
« Reply #154 on: November 26, 2016, 02:10:13 am »
Hi guys,video flying today in menorca island.
https://www.dropbox.com/s/smu9tzszstdr8vw/03420001.MOV?dl=0

Re: Post your Videos!
« Reply #155 on: November 30, 2016, 08:19:48 pm »


Just some testing with PiCamera Wifi Live feed...
Featuring VelocityRoam and Freeriding :-)
Riding on the sunset at -5° Celsius...
« Last Edit: November 30, 2016, 08:22:54 pm by DocHardinger »
Hardware: F450 Frame--Revolution Board--EMax 2213-935kv--BullTec 30A Opto--5000mAh 3S 30C LiPo--NEO M8N GPS+MAG--Fr Sky Taranis Plus + OPLink Mini
Addon: sj5000x + two axis gimbal + minimosd + eachine VT + easycap
Software: Black Rhino, LP2GO

mr_w

  • *
  • 207
    • LibrePilot
Re: Post your Videos!
« Reply #156 on: April 11, 2017, 01:30:36 am »


250 size copter, Falcon F4 fc, LibrePilot (next+), DSHOT esc testing, onboard video (low res + osd)


ernstock

  • ***
  • 137
Re: Post your Videos!
« Reply #157 on: April 26, 2017, 09:31:13 pm »
Strapped a runcam on to my 180 :

Re: Post your Videos!
« Reply #158 on: May 03, 2017, 11:28:34 am »
Had some nice FPV racing practice with friends in the forest last weekend.

Revo Nano running Librepilot 16.09 auto tuned, without cam on tho, thinking of making a new tune with the camera on. Also running OneShot125, thinking of trying to enable mutlishot since littlebee 30A should handle it.

« Last Edit: May 03, 2017, 12:59:59 pm by Zallestial »

ernstock

  • ***
  • 137
Re: Post your Videos!
« Reply #159 on: June 12, 2017, 08:38:37 pm »
And another short vid.
Finally done some editing of sorts ( removed a bit from the middle and added titles )
Includes a flip / roll of sorts !

mr_w

  • *
  • 207
    • LibrePilot
Re: Post your Videos!
« Reply #160 on: September 09, 2017, 11:00:47 am »
Testing some rate mode improvements:

 - ASWA (aka airmode in betaflight) fixes - as it appears, ASWA was broken ever since it was introduced into OP. Problem was in clearing Iterm with zero throttle, even during the flight.
 - RATE mode uses superrate like in betaflight, no expo at all.

HW: Omnibus F4, dshot600 esc (mixed: fvt littlebee 30A, dys 30A), emax 2205-2300 motors, turnigy graphene 4S/1300mah, Runcam micro swift cam, frsky xm+ rx

FW: LibrePilot (omnibusf4 + LP-549 + superrate branch)

OSD: LibrePilot built in osd with direct control from main processor.





Re: Post your Videos!
« Reply #161 on: September 13, 2017, 01:01:34 am »
Testing some rate mode improvements:

 - ASWA (aka airmode in betaflight) fixes - as it appears, ASWA was broken ever since it was introduced into OP. Problem was in clearing Iterm with zero throttle, even during the flight.
 - RATE mode uses superrate like in betaflight, no expo at all.

HW: Omnibus F4, dshot600 esc (mixed: fvt littlebee 30A, dys 30A), emax 2205-2300 motors, turnigy graphene 4S/1300mah, Runcam micro swift cam, frsky xm+ rx

FW: LibrePilot (omnibusf4 + LP-549 + superrate branch)

OSD: LibrePilot built in osd with direct control from main processor.

Ooooh cant wait to try one of these newer super versions of librepilot with dshot and fixed ASWA. Feels like Im the only one in the world going to FPV races with librepilot. None of the other racers beliave me when I say I use librepilot. :P

Mateusz

  • *
  • 808
Re: Post your Videos!
« Reply #162 on: September 14, 2017, 03:50:51 pm »
Ooooh cant wait to try one of these newer super versions of librepilot with dshot and fixed ASWA. Feels like Im the only one in the world going to FPV races with librepilot. None of the other racers beliave me when I say I use librepilot. :P

Sorry for off-topic, as it belongs more to testing section (you do it on your own risk) but what works for me:

I have a new micro-copter based on Omnibus F4 stack https://www.banggood.com/20x20mm-XJB-F425-Dshot-Flytower-Micro-F4-AIO-OSD-BEC-Flight-Control-25A-Blheli_S-2-4S-4-In-1-ESC-p-1148284.html

So I tested mr_w branch as follow
Code: [Select]
git clone https://bitbucket.org/librepilot/librepilot.git
# Then add remote repository
git remote add mr_w https://bitbucket.org/mindnever/librepilot.git
# Then I fetched branches without any merges
git fetch mr_w
# Then I just switched to his branch
git checkout mr_w/omnibus_f3_f4

And followed standard procedure described on Wiki how to compile on Linux, just with one difference
Code: [Select]
make all_sdk_install
make qt_sdk_install
make omnibusf4 bl_omnibusf4_hex gcs -j 8

It produced bl_omnibus_f4.hex (bl_ for bootloader alone) which is the bootloader in format that can be uploaded from BetaFlight configurator.
Then I just started compiled gcs, and triggered rescue mode, plugged again board flashed fw_omnibusf4.hex (fw_ for firmware alone).

Not a rate flight yet, but for compatibility with this video section wanted to check if it works
There is no GUI for board peripherals so UART1 had to be set for Sbus functionality in Configuration->UAVObject Browser in HwOmnibusF4Settings

Before that, I was unable to get it working with pre-flashed BF, due to inputs randomly jumping over 50% on all Sbus channel but works with LP just fine.

mr_w

  • *
  • 207
    • LibrePilot
Re: Post your Videos!
« Reply #163 on: September 17, 2017, 12:18:22 am »
Another one, this time not testing anything. Just having fun :)



sam028

  • *
  • 38
Re: Post your Videos!
« Reply #164 on: May 27, 2018, 11:58:55 pm »
Video gadget testing, with return to base (and a physical lost GPS at 3:33).

(TheOtherCliff changed the address from youtu.be to youtube.com so it will display correctly)
« Last Edit: October 06, 2018, 06:48:11 pm by sam028 »