Re: CC3D saving configuration not possible (but it is always disarmed)
« Reply #45 on: December 13, 2019, 08:54:30 pm »
Did you use LibrePilot or did you use Betaflight?  The answer can help others in the future.

Re: CC3D saving configuration not possible (but it is always disarmed)
« Reply #46 on: December 16, 2019, 05:07:42 pm »
If you're asking me? I use Beta Flight 10.4.0
If it ain't broke, don't fix it! But I can't seem to take my own advice ;)

Re: CC3D saving configuration not possible (but it is always disarmed)
« Reply #47 on: December 16, 2019, 05:53:19 pm »
Sorry, I was asking solmer, but your information that recent Betaflight works is also helpful.   8)  Initial posts talked about using old versions.

Re: CC3D saving configuration not possible (but it is always disarmed)
« Reply #48 on: December 16, 2019, 06:17:40 pm »
Have you found any difference in how both programs erase flash mem and have you been able to replicate the problem?
If it ain't broke, don't fix it! But I can't seem to take my own advice ;)

Re: CC3D saving configuration not possible (but it is always disarmed)
« Reply #49 on: December 17, 2019, 05:29:00 am »
I haven't looked at the CF/BF source code.

I bought an Atom and I was able to recreate at least a very similar issue just one time.  I put in some debug code to dump the settings memory, dumped it, did not find any data that I <thought> would cause it.  Used LP Erase Settings and that fixed it, and never could re-create it.

I immediately bought a second Atom from the same seller and didn't have any problem with it at all.
« Last Edit: December 17, 2019, 05:38:05 am by TheOtherCliff »

Re: CC3D saving configuration not possible (but it is always disarmed)
« Reply #50 on: December 19, 2019, 02:19:49 pm »
Murphy!  ;D

My best for Xmas and 2020
If it ain't broke, don't fix it! But I can't seem to take my own advice ;)