Wid

  • *
  • 15
How to activate channel in output? SOLVED
« on: October 05, 2018, 06:58:35 am »
I have a switch I have set up and all is fine in inputs (accessory 1, S-Bus, channel 6). Graph moves as expected with switch position.  But I don't know how to get it to show up on the outputs page. Where do I activate it to the output? I want # 6 output PWM. Is there somewhere to activate bank 4, which is associated with output 6? I have bank 4 set to 50Hz PWM in the top row. Only the first 4 channels (motors) appear active.
« Last Edit: October 05, 2018, 07:14:37 am by Wid »

f5soh

  • *****
  • 4454
    • LibrePilot
Re: How to activate channel in output?
« Reply #1 on: October 05, 2018, 07:06:44 am »
Take a look in Vehicle Tab and setup the Accessory <> Output mapping like here

Wid

  • *
  • 15
Re: How to activate channel in output?
« Reply #2 on: October 05, 2018, 07:13:06 am »
Of course! Thanks.