« on: January 09, 2018, 12:06:54 am »
 RXS255 Setup
I have a new Rise RXS 255. Setting it up I can only go as far as the transmitter stick calibration. Nothing happens when I try the stick calibration.
Need help.

Re: Rise
« Reply #1 on: January 09, 2018, 04:31:37 am »
Must have flight battery / BEC plugged in for the RC receiver to be powered.  It does not get power from "USB only".

You need a Flight Mode Switch, or the stick animations don't work, but the rest works even though you don't see it.

Your RC receiver must be configured for the protocol you want it to put out.  It must also be connected with a correct (often hand made) cable to the correct port (e.g.  SBus only works on MainPort on most FCs).