Trouble with CC3D connecting to LibrePilot
« on: January 13, 2018, 07:21:16 pm »
Hello all,

     pretty new to this quadcopter hobby. I'm having an issue with connecting the CC3D to LibrePilot. The Tx/Rx bars do not light up when the CC3D is attached to the computer but the CC3D is flashing. It seems like there is no connection. I've tried about 4 mini-usb wires to solve the problem so I don't believe it is because they are a "charging" only wire. Any troubleshooting help would be appreciated. Thanks.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Trouble with CC3D connecting to LibrePilot
« Reply #1 on: January 13, 2018, 10:18:24 pm »
Hi,

Try a Manual update:
- Disconnect board
- Firmware tab, click "Upgrade&Erase"
- Connect board

Maybe post a picture with your board.

Re: Trouble with CC3D connecting to LibrePilot
« Reply #2 on: January 13, 2018, 11:42:14 pm »
Looks like that did the trick! thanks for the assist

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Trouble with CC3D connecting to LibrePilot
« Reply #3 on: January 14, 2018, 12:34:24 am »
Great :)