[josh94]

hi guys im new to this. ive configured my quad cc3d flight controller and now on the transmitter wizard i get past the first couple of instruction and am having trouble where i have to move all controls to their maximum extents, no stick movement is shown on the screen. what is causing this? any help would be appreciated thanks tx is frsky i6x

[f5soh]

Hi,

Take a look here:
https://forum.librepilot.org/index.php?topic=3156.msg21834#msg21834

[dbrowne8898]

Hi, this is something I had an issue with at first but all it took for me to get around it was to click on "save" every time I moved to the next step. For example, when I would come on to the step on your screenshot, I would click save and then stick movements then began to show for me.

Might not be the same problem that I had but worth a go!

Sent from my SM-G920F using Tapatalk

[josh94]

Hi,

Take a look here:
https://forum.librepilot.org/index.php?topic=3156.msg21834#msg21834

thanks that worked, but now when i go to fly it it rolls. give it about 1/4 throttle and it will roll to the left or right. any ideas on what would fix that. thanks

[f5soh]

You should takeoff quickly from a flat surface.

When hovering, if quad rolls in Attitude mode and still not controllable this can be caused by vibrations that affects accelerometers.
Reduce vibrations, balance props...