O SATS in view with 7 SATS used DJI Clone GPS
« on: October 01, 2016, 10:29:48 am »
Why does the GUI show 0 SATS in view even though it's using 7 and has 3D Fix?  When it hits 8, it arms and all is normal.  Using a NAZA clone DJI compatible GPS. Firmware next:d7ebf30b 20160724 hash160c322f. See attached screen shot.  Compass works really well.
LJI S380
4 LDPower 2312 - 960KV
4 FlyColor Raptor 30A
Spektrum SPM4649T
4000 4S1P Battery
8 x 4.5 Props
Ubox Neo M8N with 12c Compass


  • *****
  • 4572
    • LibrePilot
Re: O SATS in view with 7 SATS used DJI Clone GPS
« Reply #1 on: October 01, 2016, 12:30:05 pm »
Because the Naza GPS never send this info to the board.
Or at least the decoding from original Naza just highlighted two frames that can be used.


Anyways this information is not needed for flight, same for azimut / elevation for every sat in view.