LibrePilot Forum

General Category => General Discussion => Topic started by: xrxpercy on October 01, 2016, 10:29:48 am

Title: O SATS in view with 7 SATS used DJI Clone GPS
Post by: xrxpercy on October 01, 2016, 10:29:48 am

Why does the GUI show 0 SATS in view even though it's using 7 and has 3D Fix?  When it hits 8, it arms and all is normal.  Using a NAZA clone DJI compatible GPS. Firmware next:d7ebf30b 20160724 hash160c322f. See attached screen shot.  Compass works really well.

Title: Re: O SATS in view with 7 SATS used DJI Clone GPS
Post by: f5soh on October 01, 2016, 12:30:05 pm

Because the Naza GPS never send this info to the board.
Or at least the decoding from original Naza just highlighted two frames that can be used.

http://www.rcgroups.com/forums/showpost.php?p=26210591&postcount=15

Anyways this information is not needed for flight, same for azimut / elevation for every sat in view.