Re: Wooden Multirotors
« Reply #15 on: November 08, 2015, 05:33:18 pm »
Cool mini build MrHeli4444. Which wood type did you use for the mini?

Regards

T

Thank you Traveller....I used Spanish Cedar for this build. Super light and stronger than Balsa.
« Last Edit: November 23, 2015, 04:25:14 am by MrHeli4444 »

Re: Wooden Multirotors
« Reply #16 on: November 10, 2015, 03:51:42 am »
242 g AWU Really impressed with the 1104 motors. Lifting the mobius with a little room left.
« Last Edit: November 10, 2015, 04:20:45 am by MrHeli4444 »

Re: Wooden Multirotors
« Reply #17 on: November 10, 2015, 03:55:26 am »
Some low numbers on this little guy.

Re: Wooden Multirotors
« Reply #18 on: November 10, 2015, 11:09:31 pm »
Just put on some HQ 3X3 props....no good motors got too hot to touch... :(...went back to the orange 3x2.

ArnhemAnt

  • *
  • 147
Re: Wooden Multirotors
« Reply #19 on: November 11, 2015, 08:22:10 am »
Love the thread Jim. Great to see more new frames coming to life. As someone recently commented on my wooden B4 quad that you built "Man, that frame is awesome. It's 3D flying art"
If you do what you need, you’re surviving. If you do what you want, you’re living.

Re: Wooden Multirotors
« Reply #20 on: November 11, 2015, 07:06:01 pm »
Love the thread Jim. Great to see more new frames coming to life. As someone recently commented on my wooden B4 quad that you built "Man, that frame is awesome. It's 3D flying art"
Thank you Ant  :)
  Starship LibrePilot is back in dry dock. **Be advised**  During a recent 5 minute mission #4 engine broke free from it's mounts while while running at 70% thrust. Galaxy warnings have been sent out. The engine was last seen breaking apart while speeding past the dwarf star Alpha Centauri C. The crippled ship made it back to port safely on 3 engines where it's being repaired. Keep an ear to the ground via this thread for updates.

jhan1

  • *
  • 28
Re: Wooden Multirotors
« Reply #21 on: November 11, 2015, 08:22:47 pm »
Scotty can do it!

Re: Wooden Multirotors
« Reply #22 on: November 12, 2015, 05:39:49 am »
     Out of dry dock with a new #4 motor and she's been fitted with illumination!
« Last Edit: November 23, 2015, 04:29:32 am by MrHeli4444 »

xpantz

  • **
  • 61
Re: Wooden Multirotors
« Reply #23 on: November 12, 2015, 01:14:09 pm »
Illuminators a bit too high tech for a Flintstones copter ;-)

I was thinking it should have coach lamps or similar.

Re: Wooden Multirotors
« Reply #24 on: November 14, 2015, 01:30:53 am »
Illuminators a bit too high tech for a Flintstones copter ;-)

I was thinking it should have coach lamps or similar.

ha ha ..old and new on the Starship LP  ;D

Re: Wooden Multirotors
« Reply #25 on: November 14, 2015, 01:38:37 am »
Have begun an Octo build. A 220mm Micro Octo with a gimbal I'm hoping.

Re: Wooden Multirotors
« Reply #26 on: November 14, 2015, 07:53:58 pm »
 Todays progress..Fitting video gear while waiting on motors.

Re: Wooden Multirotors
« Reply #27 on: November 15, 2015, 07:28:29 pm »
CCD cameras work better at night than CMOS.  If you get a camera that has OSD (buttons and settings menu), you can adjust things like make it more sensitive for night flight, or make it where looking at sun you can still see ground, or fix bad colors that happen when there is no white in picture.  Also automatic SenseUp can get even more light sensitivity by reducing frame rate.

A good CCD camera plus a good light gathering lens will make it possible to fly with just moonlight.  My best camera sees better in the moonlight than I do, I don't have trouble walking around in the moonlight.

CMOS can definitely be smaller, lighter, less expensive.

Re: Wooden Multirotors
« Reply #28 on: November 16, 2015, 03:13:22 am »
CCD cameras work better at night than CMOS.  If you get a camera that has OSD (buttons and settings menu), you can adjust things like make it more sensitive for night flight, or make it where looking at sun you can still see ground, or fix bad colors that happen when there is no white in picture.  Also automatic SenseUp can get even more light sensitivity by reducing frame rate.

A good CCD camera plus a good light gathering lens will make it possible to fly with just moonlight.  My best camera sees better in the moonlight than I do, I don't have trouble walking around in the moonlight.

CMOS can definitely be smaller, lighter, less expensive.

  Good info Cliff. Most of the flying i'll be doing with this rig will be indoors in well lit areas. Would be fun to set up a night flyer with a CCD camera and custom night settings. Good to know this. thank you

Re: Wooden Multirotors
« Reply #29 on: November 19, 2015, 03:01:19 am »
 I put lifts on the 4 CW motors for overlaping props. May need to make the lifts a bit higher but will try it like this first.  Just waiting on a few more parts she should be airborne by the weekend...  I went with the DYS  3100kv... 4" props for starters