Two Spectrum satellites
« on: May 07, 2016, 10:05:12 am »
Hello, I am using a small Hex copter for tail chase videos with other fixed wing models, but I am struggling with range issues at times. Is there a way of setting up two Spectrum Satellites on one board to increase my diversity signal? I am using a CC3D and genuine DSMX satellites. I don't really want to use the breakout cable and a full sized receiver. Cheers.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Two Spectrum satellites
« Reply #1 on: May 07, 2016, 11:23:02 am »
Hi, welcome.

The diversity from two receivers is not supported onboard.
You could connect another DSM to add spare channels with another RC radio, but no diversity.


daveapplemotors

  • *
  • 245
  • Helis rule
Re: Two Spectrum satellites
« Reply #2 on: May 07, 2016, 01:14:57 pm »
Henrick Muller (sp?) from HeliFreak made some dual satellite adapters a few years ago. He couldn't sell them in North
America because we have too many lawyers.

It is a cool little device.
 
Happy Landings!