LibrePilot Forum

Development => Hardware => Topic started by: SpeedfreakNZ on May 07, 2016, 10:05:12 am

Title: Two Spectrum satellites
Post by: SpeedfreakNZ on May 07, 2016, 10:05:12 am

Hello, I am using a small Hex copter for tail chase videos with other fixed wing models, but I am struggling with range issues at times. Is there a way of setting up two Spectrum Satellites on one board to increase my diversity signal? I am using a CC3D and genuine DSMX satellites. I don't really want to use the breakout cable and a full sized receiver. Cheers.

Title: Re: Two Spectrum satellites
Post by: f5soh on May 07, 2016, 11:23:02 am

Hi, welcome.

The diversity from two receivers is not supported onboard.
You could connect another DSM to add spare channels with another RC radio, but no diversity.

Title: Re: Two Spectrum satellites
Post by: daveapplemotors on May 07, 2016, 01:14:57 pm

Henrick Muller (sp?) from HeliFreak made some dual satellite adapters a few years ago. He couldn't sell them in North
America because we have too many lawyers.

It is a cool little device.