Hi! I cant get a old Copter control board(see image ) connect to the reciver a Frsky TFR 4 (jumper on ch3 to ch4 to get ppm on ch1 ) and transmitter Futaba T8FG.
I had openpilot on it before and I fly with it 2 weeks ago(a multicopter 5") the reciver is connected to reciver port as ppm+nooneshot
And I upgrade it to Librepilot 16.09 today (have tried to erase it also)and now I can't get it to "see" the reciver.
In the transmitter wizard nothing happens. Does Copter control boards work ok on Libre pilot?
*update* Have now test with a CC3D same behavior no rx connection.have also test with another Frsky TFR 4 and no connection. Have also measured the cable(multimeter)
between reciver port and rx all good connection.
So may I miss something in configuration
*Update* saw in the docs that the ppm signal should be at pin 3 when ppm+nooneshot selected. I had it on pin 8
I have old plush ecs(yes this is old...) so don't know why i had it on pin 8(no blheli,simon k) have this changed since openpilot?
How ever now it work as it should!