DC motor out/ CC3DAtom
« on: February 22, 2016, 10:27:07 am »
Dear Guys!

question #1:
I'd like to build a micro quad or hexacopter with my Atom board,
(with some FETs and 7mm DC motors)
is it possible to tune the output pwm to higher frequencies and to 0 to 100% range?

question#2:
I saw that we can set te Settings/ActuatorSettings/ChannelType from PWM to "Arming LED" or
"Info LED"
but these settings not really works, I cant find any info about these. It would be nice to have some
additional LEDs, couse I cant see the onboard LEDs from a distance

Re: DC motor out/ CC3DAtom
« Reply #1 on: March 02, 2016, 11:12:19 pm »
1 - probably possible.  would need a dev to step up and do it (generally means wants to do it for himself :) ).
2 - that is for WS2811 style "smart" LEDs.  it works.  I have used it.

hwh

  • *
  • 1018
Re: DC motor out/ CC3DAtom
« Reply #2 on: March 03, 2016, 12:29:37 am »
Instructions for using WS2811 LEDs are at https://librepilot.atlassian.net/wiki/display/LPDOC/Setup+WS281x+Led

But I think they only work on revo class flight controllers and not on a cc3d.