JST plugs
« on: January 26, 2016, 06:44:40 am »
Hi,

What are the size of the JST plugs used for the Revolution PWR port? I want to make up my own cable to the voltage/current sensor. I think they are JST-SH but want to be sure

Thanks
F450 Clone
EMax 2313 with generic 10x4.5 carbon fiber prop
DYS XM20A BLHeli mini 20A ESC
Revo with OPLink mini
3S 3300 nano-tech
Taranis XD9 Plus TX with X4R-SB RX

Mateusz

  • *
  • 808
JST plugs
« Reply #1 on: January 26, 2016, 07:23:40 am »
I bought bunch of those http://www.ebay.com/itm/20-SETS-Mini-Micro-SH-1-0-4-Pin-JST-Connector-with-Wires-Cables-100MM-/251979895512?

They work fine, so JST SH 1.0

The voltage/current port has the same plug as flexi or main port.
« Last Edit: January 26, 2016, 07:28:32 am by Mateusz »