LibrePilot Forum

Development => Hardware => Topic started by: jobybett on January 26, 2016, 06:44:40 am

Title: JST plugs
Post by: jobybett on January 26, 2016, 06:44:40 am
Hi,

What are the size of the JST plugs used for the Revolution PWR port? I want to make up my own cable to the voltage/current sensor. I think they are JST-SH but want to be sure

Thanks
Title: JST plugs
Post by: Mateusz on January 26, 2016, 07:23:40 am
I bought bunch of those http://www.ebay.com/itm/20-SETS-Mini-Micro-SH-1-0-4-Pin-JST-Connector-with-Wires-Cables-100MM-/251979895512?

They work fine, so JST SH 1.0

The voltage/current port has the same plug as flexi or main port.