[Rood_Dragon]

can the revolution support an octocopter layout I am looking to build an eagle 650 with 8 or 4 motors just starting my research

[xfce]

can the revolution support an octocopter layout I am looking to build an eagle 650 with 8 or 4 motors just starting my research

yes, i think it support up-to 12 pwm output, maybe u can use the gcs's vehicle setup wizard

[f5soh]

Octos are not supported in Wizard.

Here is the FlexiIO (receiver) port pinout for Revolution:

[Rood_Dragon]

so if you have a h copter and have 2 motors per arm 1 up 1 down do you split the single from the esc or daisey chain it if you wanted the two motors to act as one if you know what i mean

[f5soh]

Every motor with his output.

The "quad" you describe is the OctoCoax.


You need to affect two motors outputs on FlexiIO port.

[f5soh]

You should do something like that and keep the bank5 (white outputs) for other usage like a buzzer.

Output 8 and 9 are on FlexiIO, pin7 and pin8

[Rood_Dragon]

Awesome thanks for the information