LibrePilot Forum
Users => Vehicles - MultiRotors => Topic started by: Rood_Dragon on January 25, 2016, 02:10:42 am
-
can the revolution support an octocopter layout I am looking to build an eagle 650 with 8 or 4 motors just starting my research
-
can the revolution support an octocopter layout I am looking to build an eagle 650 with 8 or 4 motors just starting my research
yes, i think it support up-to 12 pwm output, maybe u can use the gcs's vehicle setup wizard
-
Octos are not supported in Wizard.
Here is the FlexiIO (receiver) port pinout for Revolution:
(https://forum.librepilot.org/index.php?action=dlattach;topic=687.0;attach=1304)
-
so if you have a h copter and have 2 motors per arm 1 up 1 down do you split the single from the esc or daisey chain it if you wanted the two motors to act as one if you know what i mean
-
Every motor with his output.
The "quad" you describe is the OctoCoax.
(https://librepilot.atlassian.net/wiki/download/thumbnails/5669255/octo-coax-X.png)
You need to affect two motors outputs on FlexiIO port.
-
You should do something like that and keep the bank5 (white outputs) for other usage like a buzzer.
Output 8 and 9 are on FlexiIO, pin7 and pin8
(https://forum.librepilot.org/index.php?action=dlattach;topic=687.0;attach=1315)
(https://forum.librepilot.org/index.php?action=dlattach;topic=687.0;attach=1317)
-
Awesome thanks for the information