[sabgto]

also failed with "resurrect2-1509" the same result as with normal ver 15.09.

I understand that it could be a hardware problem but because the results with "resurrect2" ver 15.01 I think is more probably a software problem.

I'm going to read "https://forum.librepilot.org/index.php?topic=208.0". Maybe I can find something that can help me.

[sabgto]

I could not make it to work with librePilot. Only responded ok with "resurrect2" ver 15.01.
However it was a conflict with ver 15.09 of GCS.

I tried with TauLabs and...
 IT WORKED!!!.

It worked with taulabs last version 20151123-76f58893.

I think some changed between openPilot ver 15.01 and ver 15.02 that is causing the problem my revo board is showing.

So now, I move to tauLabs.

Thanks for all your help and good luck.