Did some adjustments on the Stabilization-Altitude page, but it had limited impact.
What had more impact was to adjust the combination of throttle and pitch curves on the transmitter around where hover takes place.
I have a suspicion here:
the FC in AltitudeVario/AltitudeHold is trying to correct altitude just by altering the thrust, and not by changing the collective pitch of the heli.
This would be logical, its a mode to be set for the thrust.
Also, since both throttle- and collective pitch curves are defined in the transmitter (in my case), there would be no way for the FC to know what pitch to change into, since the pilot is not changing the sticks.
Can anyone confirm if this is how it works?