flysky I6s and Rxs270
« on: September 08, 2017, 05:22:57 pm »
Having trouble getting my transmitter to respond to my drone. Actually I can't seem to get it to do anything. Hoping someone might be able to walk me through it?

Re: flysky I6s and Rxs270
« Reply #1 on: September 08, 2017, 09:34:07 pm »
Some questions to aid troubleshooting:

What kind of flight controller is it?
What kind of firmware is on the FC right now?
What signal type (PWM, PPM, Sbus, etc.) are you using from receiver to FC?
Have you successfully bound and tested (like with a servo or ESC/motor) the transmitter and receiver?
What kind of computer and OS is it?
Are you aware that you must configure the "arming" and the default is "always disarmed"?
Are you aware that the receiver will not get power from USB and so a battery must be plugged in if you need the receiver to work?

Re: flysky I6s and Rxs270
« Reply #2 on: September 09, 2017, 04:36:21 am »
I've done all that. The problem is I can't seem to get my transmitter to respond to the wizard gestures it asks me to do. I rebooted it with librepilot I think. lol I did all the steps and when it came to the transmitter I couldn't get that to respond. Do I have to program my flysky i6s? So confused . Thanks for replying