Transmitter Wizard Acting wierd - Taranis QX7
« on: June 30, 2017, 11:09:49 am »
Hey,

I'm pretty new to this so please bare with me. I have myself an eachine racer 250, with a FRSKY X4R Reciever and a Taranis Qx7 transmitter. The FRSKY X4R is hooked into the main port of the cc3d using sbus. The TX wizard goes along just fine until I get to the flight mode switch part. After that, it can't detect any switches, and there is no feedback in the controller view when moving anything. From everything I've seen, it is supposed to show movement.

Any ideas on how I can fix this?

Thank you

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Transmitter Wizard Acting wierd - Taranis QX7
« Reply #1 on: June 30, 2017, 11:52:31 am »
Hi,
You should not skip the Flightmode switch detection.

Take a look here:
https://forum.librepilot.org/index.php?topic=3156.msg21834#msg21834

Re: Transmitter Wizard Acting wierd - Taranis QX7
« Reply #2 on: June 30, 2017, 06:25:02 pm »
Taranis and most other modern transmitters don't do anything with the switches until you program the transmitter to do something.  The transmitter isn't sending anything out when you flip the switch.

Google for a video.

Re: Transmitter Wizard Acting wierd - Taranis QX7
« Reply #3 on: July 01, 2017, 03:05:36 am »
Awesome! Both the answers solved my issue!

Thanks again!