Eachine Racer 250
« on: February 11, 2017, 01:48:44 pm »
I want to utilize one shot on the ESCs that I have replaced, as well as update the motors, and props being used. I have erased and updated, but the board always goes back to the OEM Eachine  preload. My current build includes Racestar 25A BL-Heli S, Emax 2204/2300 motors, Racekraft 5051 props.
I am new to the Quadcopter world,and, I don't have a Physics, or IT Certification. So keeping it simplistic would be awesome.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Eachine Racer 250
« Reply #1 on: February 11, 2017, 02:29:36 pm »
What input type do you use ?

If you want to use OneShot output with a CC3D you need to use one input type different from PWM, can be SBus, PPM, etc...
PWM input and CC3D are not compatible with Oneshot output.



Re: Eachine Racer 250
« Reply #2 on: February 12, 2017, 03:39:59 pm »
Well POOP...
The Eachine has both things going against it then, it has a stock CC3D board running PWM.
It's got some issues that may need to be addresses with flight characteristics that are better hashed out in another post. Thanks for your reply!!