LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: tater6061 on February 11, 2017, 01:48:44 pm

Title: Eachine Racer 250
Post by: tater6061 on February 11, 2017, 01:48:44 pm
I want to utilize one shot on the ESCs that I have replaced, as well as update the motors, and props being used. I have erased and updated, but the board always goes back to the OEM Eachine  preload. My current build includes Racestar 25A BL-Heli S, Emax 2204/2300 motors, Racekraft 5051 props.
I am new to the Quadcopter world,and, I don't have a Physics, or IT Certification. So keeping it simplistic would be awesome.
Title: Re: Eachine Racer 250
Post by: f5soh on February 11, 2017, 02:29:36 pm
What input type do you use ?

If you want to use OneShot output with a CC3D you need to use one input type different from PWM, can be SBus, PPM, etc...
PWM input and CC3D are not compatible with Oneshot output.


Title: Re: Eachine Racer 250
Post by: tater6061 on February 12, 2017, 03:39:59 pm
Well POOP...
The Eachine has both things going against it then, it has a stock CC3D board running PWM.
It's got some issues that may need to be addresses with flight characteristics that are better hashed out in another post. Thanks for your reply!!