joani

  • **
  • 57
gps assist no work!!
« on: December 27, 2016, 04:22:35 pm »
Hello a query
 Why do not the modes assisted in configuration work if I put
Rth + bank1 + gps asisitdo = error
Poshold + bank2 + assisted gps = confirmed
Posabsoluta + bank3 + gps asisitdo = error
. Now if I put them without gps assisted, they measure ok, they work, or is it a soft error ??

Re: gps assist no work!!
« Reply #1 on: December 27, 2016, 05:59:18 pm »
GpsAssist it used for non GPS modes.  When the transmitter controls are centered it enters a PositionHold.

joani

  • **
  • 57
Re: gps assist no work!!
« Reply #2 on: December 28, 2016, 12:44:23 am »
GpsAssist is used for non-GPS modes: that did not understand or wanted to put assisted gps are for gps modes. What I say if I put the own modes (rth, poshold) without putting gps asit, it gives me configuration  !!!, Do these work the same or is it an error in the librepilot?

joani

  • **
  • 57
Re: gps assist no work!!
« Reply #3 on: December 28, 2016, 03:08:39 am »
The complementary mag mode outdoors, which does, can be replaced instead of gpsin13?


Re: gps assist no work!!
« Reply #4 on: December 28, 2016, 11:28:02 am »
It must be built and configured properly such that GPS modes like VelocityRoam and PositionHold work well (no GpsAssist), and then you can simply set modes like Attitude to have GpsAssist added.

I hear that you can use Complementary+Mag+GPS for GPS modes, but I have always used INS13, and I recommend INS13.

To be honest, I don't use GpsAssist much.  I use VelocityRoam if I want GPS.

joani

  • **
  • 57
Re: gps assist no work!!
« Reply #5 on: December 29, 2016, 01:21:45 am »

Friend I just tried on GPS 13 and walks. If you well teimpla the horizon takes off well I did not get it from the configuration in the modes still giving error, when I put
Rth bank 2 + assisted gps = error. The following answer is not achieved: it is assumed that it has been calibrated should give okey; Not so in poshold + bank3 + gps assisted = ok
As I solve it, I need it to take me too rth + gps asitido, to what should: not supposed to be all okey ??

f5soh

  • *****
  • 4527
    • LibrePilot
Re: gps assist no work!!
« Reply #6 on: December 29, 2016, 01:37:37 am »
GPSAssist is only used with primary flightmodes like Attitude or Rattitude.
PosHold or RTH are already assisted flighmodes and NO NEED GPSAssist.

https://librepilot.atlassian.net/wiki/display/LPDOC/Gps+assist


joani

  • **
  • 57
Re: gps assist no work!!
« Reply #7 on: December 29, 2016, 01:47:22 am »
Is it possible to configure gps without the gps? And so for what is the GPS enabled? We sponge that it does that; When you put the configuration, logically should not do that, assist with gps mode ???. You say that you should not put gps admitted: the truth that I do not understand.from and the agradesco a lot of their answers, is the first in a forum that they answer me right away so I am forced to share what little you learned in these years setting Drones with different flight controls (apm; Flip 32) thank you very much.

f5soh

  • *****
  • 4527
    • LibrePilot
Re: gps assist no work!!
« Reply #8 on: December 29, 2016, 02:00:26 am »
Please write in Spanish, i don't understand what you are saying.

Habla en castellano por favor, no entiendo nada a lo que estas diciendo. Gracias.

joani

  • **
  • 57
Re: gps assist no work!!
« Reply #9 on: December 29, 2016, 02:49:10 am »
Friend I think I start to understand what it says, I was using a reverse logic I thought that the modes where the GPS is used, (rth poshold pos absolute) were the modes where you should get gps watched

joani

  • **
  • 57
Re: gps assist no work!!
« Reply #10 on: December 30, 2016, 10:01:03 pm »
My friend, as you want it to be Castilian, if it is a section in English, I hope it is so, just use the google translator, for the same and as you see, these, most, never translate well greetings and happy year

f5soh

  • *****
  • 4527
    • LibrePilot
Re: gps assist no work!!
« Reply #11 on: December 30, 2016, 11:08:10 pm »
Si te propongo escribir en Castellano es que no entendemos lo que estas pidiendo/diciendo y no entiendes lo que te estamos contestando.
Que sea el foro en Ingles o Español importa poco, justo algo para intercambiar mejor.

Feliz año nuevo

joani

  • **
  • 57
Re: gps assist no work!!
« Reply #12 on: December 31, 2016, 11:50:26 am »
Okey gracias , no sabe lo  bien que me viene :) ,  la verdad, me sentia un poco incomodo tratando  de hacerme entender , en otros foros en ingles , lo primero que te exigen es que se hagan las preguntas  en el mismo idioma  Como el moderador del foro,  o por lo menos a mi entender es el que tiene todas las respuestas que  necesito.
Me pareció correcto ser yo el que tratara de hacerme entender y con muy poco éxito cabe aclarar :):bueno  le deseo feliz año nuevo

f5soh

  • *****
  • 4527
    • LibrePilot
Re: gps assist no work!!
« Reply #13 on: December 31, 2016, 12:04:26 pm »
El problema viene también del Google traducción que no te entiende si no escribes correctamente y luego te sale un ingles incomprehensible.
Para contestar en el mismo idioma, se suele hacer lo mismo aquí.

Si todo esta aclarado podemos seguir en Ingles :)

joani

  • **
  • 57
Re: gps assist no work!!
« Reply #14 on: December 31, 2016, 04:58:24 pm »
Como tienen todos los traductores ,no es  tan sencillo los sustantivo primero y toda la fonética y dicción  que conlleva , si si estamos de acuerdo con el google traductor,  pero hay un par mas !!! saludos amigo le deseo un prospero año venidero.