Wizard Sets Up Motors Different
« on: November 17, 2016, 04:37:07 pm »
I use One Shot 125 escs but when I use the Wizard to setup the quad, it sets motor 1 & 2 at One Shot 125 but it sets motors 3 & 4 on PWM. The manual says that when setting up manually, all motors should be set the same. I've switched them and don't see any difference in flight. Any thoughts on this?


  • *****
  • 4572
    • LibrePilot
Re: Wizard Sets Up Motors Different
« Reply #1 on: November 17, 2016, 06:32:03 pm »
Bank settings are applied to one channel or a set of channels, depends on board you use.

You should look at bank color / and colors applied to outputs