jtrout19

  • ****
  • 334
Minimosd Bat Voltage with Bat connected to MINIMOSD board
« on: November 07, 2016, 03:15:09 am »
So I noticed that minimosd can be configured and RSSI and BAT and CURRENT sensors can be hooked directly to the OSD. So I decided to connect my battery to my minimosd and it is displaying 17v on a 12v battery. So I am bypassing the REVO all together so how in the world do you configure the OSD to display correct battery voltage? I couldnt find any information on it.

jtrout19

  • ****
  • 334
RSSI from revo?
« Reply #1 on: November 07, 2016, 03:57:00 am »
How do I connect my analog rssi out from my RX to my Revolution so it will send data to my minimOSD?

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Minimosd Bat Voltage with Bat connected to MINIMOSD board
« Reply #2 on: November 07, 2016, 09:55:30 am »
Revolution do not support analog Rssi input.

onboard osd Battery factors are set in Setup menu (using the toggle channel):
https://librepilot.atlassian.net/wiki/display/LPDOC/MinOPOSD+setup#MinOPOSDsetup-RCOSDsetuprc_setup_screen