LibrePilot Forum

Users => Applications - FPV => Topic started by: jtrout19 on November 07, 2016, 03:15:09 am

Title: Minimosd Bat Voltage with Bat connected to MINIMOSD board
Post by: jtrout19 on November 07, 2016, 03:15:09 am

So I noticed that minimosd can be configured and RSSI and BAT and CURRENT sensors can be hooked directly to the OSD. So I decided to connect my battery to my minimosd and it is displaying 17v on a 12v battery. So I am bypassing the REVO all together so how in the world do you configure the OSD to display correct battery voltage? I couldnt find any information on it.

Title: RSSI from revo?
Post by: jtrout19 on November 07, 2016, 03:57:00 am

How do I connect my analog rssi out from my RX to my Revolution so it will send data to my minimOSD?

Title: Re: Minimosd Bat Voltage with Bat connected to MINIMOSD board
Post by: f5soh on November 07, 2016, 09:55:30 am

Revolution do not support analog Rssi input.

onboard osd Battery factors are set in Setup menu (using the toggle channel):
https://librepilot.atlassian.net/wiki/display/LPDOC/MinOPOSD+setup#MinOPOSDsetup-RCOSDsetuprc_setup_screen