Throttle Up
« on: October 12, 2016, 08:10:27 pm »
Hello, is there a way in LibrePilot to set a switch that will arm the quad and begin running the motors? I'm using a Flysky fs-i6 is that helps. Thanks!

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Throttle Up
« Reply #1 on: October 12, 2016, 08:15:54 pm »
Yes,

Input tab > Arming Settings and select Accessory0 for example.

Assuming the Accessory refers to the PWM - Input 6, you assigned a switch to one receiver output and is calibrated like others channels.
Be sure the Accessory's neutral is set to middle range.