MickD

  • *
  • 19
Re: CC3D Support
« Reply #15 on: July 25, 2015, 06:02:28 pm »
Hope I am not out of line asking this here but does anyone have access to the OPTune calculator?  The one that was available on the OP site is down.  Not sure if it's temporary or what, but I thought some of you may had been involved in the development of it. 

liftbag

  • *****
  • 215
    • LibrePilot
Re: CC3D Support
« Reply #16 on: July 25, 2015, 06:45:36 pm »

Hope I am not out of line asking this here but does anyone have access to the OPTune calculator?  The one that was available on the OP site is down.  Not sure if it's temporary or what, but I thought some of you may had been involved in the development of it.
Yes, the site is down, maybe it is temporary.

Re: CC3D Support
« Reply #17 on: July 25, 2015, 08:27:30 pm »
It's a simple formula and the factors are posted (maybe restricted viewing) elsewhere on OP forum.

Of course, I don't have access to OP restricted forums any more.  OP / OPNG blocks me via IP (have they never heard of proxies?) and user name (the worst since I can't even change my OP user to say that I am banned).  Why doesn't OP mark us as banned?  Because they don't want to show how many good people are banned there now.

Re: CC3D Support
« Reply #18 on: July 26, 2015, 07:15:17 am »
For "off-line" computation  :D

MickD

  • *
  • 19
Re: CC3D Support
« Reply #19 on: July 26, 2015, 07:24:23 am »
For "off-line" computation  :D

This is great.  Thanks for posting this. 

cato

  • *
  • 341
Re: CC3D Support
« Reply #20 on: July 26, 2015, 09:06:23 am »
that's nice, THANKS :)
Nighthawk 250, MT1806, 12A ESC OneShot125, Revo, M8n GPS, FPV
Cinetank MKII, Elite 2216, 30A Afro OneShot125, Revo Clone, M8N GPS

Re: CC3D Support
« Reply #21 on: July 26, 2015, 02:35:15 pm »
thanks for this.

cato

  • *
  • 341
Re: CC3D Support
« Reply #22 on: July 26, 2015, 05:04:24 pm »
I compiled the new git source today and connected a CC3D, it recognized it and uploaded the firmware. The CC3D ist working, but unfortunately I have no spare frame to test it right now ...
Nighthawk 250, MT1806, 12A ESC OneShot125, Revo, M8n GPS, FPV
Cinetank MKII, Elite 2216, 30A Afro OneShot125, Revo Clone, M8N GPS

Re: CC3D Support
« Reply #23 on: July 27, 2015, 10:07:30 am »
thanks for this.

OPNG has a new OPTune @ https://optune.opng.org/

They have changed the factors for the computation of Yaw. Roll and Pitch end up with the same values, Yaw is now a lot higher than before. To be tested ....

MickD

  • *
  • 19
Re: CC3D Support
« Reply #24 on: July 27, 2015, 02:13:59 pm »
I was able to get the same results with both calc's

Re: CC3D Support
« Reply #25 on: October 26, 2015, 12:00:43 pm »
Is there plans to revise coding for CC3D to support baro and sonar to achieve altitude hold as what Cleanflight has done for CC3D? It's great that Supermoon has support for CC3D, just hope there's some major revisions in the next release.
« Last Edit: October 26, 2015, 12:05:14 pm by joeclone »

Zniggurat

  • *
  • 9
  • Sant'Ilario! °L°
    • B.F.C.T. YouTube Channel
Re: CC3D Support
« Reply #26 on: October 26, 2015, 12:46:18 pm »
Is there plans to revise coding for CC3D to support baro and sonar to achieve altitude hold as what Cleanflight has done for CC3D? It's great that Supermoon has support for CC3D, just hope there's some major revisions in the next release.

Useless or not-so-important?  :P

If you want baro buy a Revo  ;D
Barely Flying Club Trento pilot

Re: CC3D Support
« Reply #27 on: October 26, 2015, 03:21:34 pm »
Useless or not-so-important?  :P

If you want baro buy a Revo  ;D

Ermm this is CC3D support, ??? why revo then? Might aswell go the way of OPNG.
« Last Edit: October 26, 2015, 03:26:08 pm by joeclone »

Re: CC3D Support
« Reply #28 on: October 26, 2015, 03:29:02 pm »
CC3D support is intended mostly for acro/fpv applications. No autonomous functionality is planned right now for CC3D. This also includes barometer/sonar.
There is not really so much interest in adding this kind of functionalities to CC3D, being the platform pretty limited nowadays, lacking sensors and "horsepower" to do anything interesting.

Zniggurat

  • *
  • 9
  • Sant'Ilario! °L°
    • B.F.C.T. YouTube Channel
Re: CC3D Support
« Reply #29 on: October 26, 2015, 03:50:14 pm »
Thanks Alessio for the "extended version" of my post LoL
Barely Flying Club Trento pilot