lucapif

  • *
  • 20
Revo and entrance sumD
« on: July 12, 2016, 08:33:16 am »
Hi, you can have the FlexiIO Revo in SumD and out pwm?
thank you
Luca
Luca

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revo and entrance sumD
« Reply #1 on: July 12, 2016, 12:15:30 pm »
FlexiIO refers to the receiver port

You can set the flexiPort as Hott SumD and receiver port (FlexiIO) as outputs



This applies to Next branch (Hott input) ^^^

https://librepilot.atlassian.net/wiki/display/LPDOC/Revolution+Configuration#RevolutionConfiguration-FlexiIOpinOut/Functions
« Last Edit: July 12, 2016, 04:34:53 pm by f5soh »

lucapif

  • *
  • 20
Re: Revo and entrance sumD
« Reply #2 on: July 12, 2016, 01:58:34 pm »
Thank you f5soh.

Main port= GPS
Flexi port = OSD
How can I do?

8CH-Receiver-PWM-to-PPM Encoder-Signal-Converter=FlexiIO(ppm in+ PWM out)?
Luca

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revo and entrance sumD
« Reply #3 on: July 12, 2016, 02:26:20 pm »
I don't understand what you want: SumD refers to Hott (SumD) and now you talk about PPM ?

Please explain your full setup wanted.

lucapif

  • *
  • 20
Re: Revo and entrance sumD
« Reply #4 on: July 12, 2016, 04:02:01 pm »
Sorry but I do not know English.
I rx hott
Luca

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revo and entrance sumD
« Reply #5 on: July 12, 2016, 04:33:00 pm »
Ok

Current next branch support SumD on FlexiPort but currently cannot help you because you need Outputs on flexiIO.

If you can convert to PPMsum, you can configure as follows:



FlexiPort for OSD
MainPort for GPS
FlexiIO for PPM and Outputs