[mcpll]

Ciao a tutti,
sotto consiglio di alessio sono a chiedere se qualcuno ha l'ultima versione del firmware di mininosd compatibile con Librepilot.
Questo perchè utilizzando la versione che utilizzavo con openpilot, riuscivo ad vedere quando il modello si armava o meno e i vari cambi di stato.
Così facendo riuscivo a far partire il timer al momento che il modello è armato.

[f5soh]

Hello,

This one should work :

[lucapif]

Funziona anche con questo? http://flyduino.net/Micro-MinimOSD_1

[f5soh]

Yes, works.
There is some mods for analog input pins.

See archive attached, should fit better current 15.09 release.

In OSD_Config.h :

Code: [Select]

// JRChange: Flight Batt on MinimOSD:
// #define FLIGHT_BATT_ON_MINIMOSD

// Add MicroOSD KV team mod
// #define MICRO_OSD_KVTEAM

// JRChange: Flight Batt on Revo:
#define FLIGHT_BATT_ON_REVO
If you want analog inputs with this really small, you can choose  MICRO_OSD_KVTEAM and FLIGHT_BATT_ON_MINIMOSD

FLIGHT_BATT_ON_REVO is used when current sensor is connected to Revo.

Tell me what you want exactly and i can post a .hex file.

Sorry for english...
Laurent

[lucapif]

Thank you. Ordered. We feel when it arrives. (Google traslate)
Luca

[nabreu]

Hi!

Great to find this as it´s the only issue i have with Librepilot. Can you post an Hex file compatible with Minimosd micro with KVTeam mod ?

I had it working with OP 15.02 but with Librepilot i get the battery status but not the telemetry.

Also, to calibrate the OSD, is it still possible using the sticks (left Yaw + left Roll) ?

Many Thanks!

[f5soh]

battery sensor connected to MinimOsd or Revo ?

[nabreu]

Hi!

Connected to MinimOsd

[f5soh]

and cc3d or revo ?

[nabreu]

CC3D, but in a very near future, also Revo 

[f5soh]

Ok,

Try attached hex.

For MICRO_OSD_KVTEAM and all analog inputs : battery / rssi

Battery factors and level still configurable using sticks

[nabreu]

Hi.

Just test it. Telemetry is working. But battery shows 00.0 and cant calibrate with sticks.

[f5soh]

Do you access setup screen ?

[nabreu]

Tried like i used to with left roll and left yaw but did not work.

[f5soh]

First to enter setup screen you need the "OSD Toggle channel" set with the config tool.

just after boot, move this channel and you enter Setup Screen

"Tried like i uses to with left roll and left yaw but did not work. "

With minOPosd ?

Only one bat pin should works, maybe try the other pin