Whats the best way to figure out how many satellites you are locked onto as well as other pertinent GPS data without a laptop/OPLINK or FPV/OSD?  Sometimes I will just wanna go fly quickly without having to haul everything out, laptop, FPV screen, etc.  But I think with GPS, some of that data is very important.  Is there anyway to get that data to show on my Devo10 transmitter?  Or maybe a little LCD screen that mounts to the quad to give you data before you arm it?  Can the WS281X LED output the numbers of sats?  Probably don't need to see it the whole time I'm flying as long as I can view it before I arm?  Just looking for ideas so I can start to collect all the parts that are going to be needed for this.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #1 on: May 08, 2016, 07:37:21 pm »
Ws28xx led can display GPS status, look here:
https://librepilot.atlassian.net/wiki/display/LPDOC/Setup+WS281x+Led

Before collecting parts you should contribute to code and add LCD or Devo10 telemetry support.
You're welcome :)

Please, "Revolution" do not exist. There is CC3D boards and Revolution boards.

karla

  • *****
  • 629
Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #2 on: March 10, 2018, 08:28:39 am »
I know this is an old thread but it seems spot on, so:

Can I set up a WS2811LED using a Revolution Nano board?
(using output pins 1-6 obviously since don't have other options like full Revo board).

Thanks a lot
K

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #3 on: March 10, 2018, 11:59:45 am »
WS2811LED works only using the servo1 output with RevoNano.

karla

  • *****
  • 629
Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #4 on: March 11, 2018, 04:46:05 am »
Good enough.
Thanks a lot!


Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #5 on: March 11, 2018, 11:20:04 am »
WS2811LED works only using the servo1 output with RevoNano.

Added this to WS2811 wiki.

karla

  • *****
  • 629
Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #6 on: March 12, 2018, 03:39:25 am »
Thanks, that will help next guy trying.
I think these status LEDs are very helpful.
I noticed a small typo... but don't know how to fix it.

oardRevolution board supports external leds, up to 10 ...

karla

  • *****
  • 629
Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #7 on: March 16, 2018, 10:52:17 am »
For my RevoNano board I could not get the led to work until I used the file here:

https://forum.librepilot.org/index.php?topic=3891.msg26496#msg26496

But I feel confused as to what Next version to use to avoid the mismatch warning... (LP-544???)

Any tips here warmly welcome :)

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #8 on: March 16, 2018, 05:58:54 pm »
RevoNano works fine here with WS28xx led connected to the servo #1 output,  using latest next branch.
You do not need to flash a 4 months old firmware.

karla

  • *****
  • 629
Re: Revolution, viewing GPS telemetry data without laptop or fpv
« Reply #9 on: March 17, 2018, 03:44:22 am »
Thanks for checking.
I am back to a more recent next and it does work, however a bit intermittently, I think I have an issue with the power supply. It is alive so I am in good hopes.