[Lone_droner]

I recently built my first fpv quad it's a 180mm qav clone running cc3d and Librepilot with fs i6 radio. I can't adjust the stick setting so that it will begin to idle around 10% and begin to hover around %40. As of now I need at lease half stick or more to hover. Any help would be appreciated

[f5soh]

Hi, welcome.

Go to Vehicle tab and adjust the Throttle curve ?

From the flight conroller point of view, no need to hover at 50% exactly. That just for your feelling.

[Lone_droner]

Hi, welcome.

Go to Vehicle tab and adjust the Throttle curve ?

From the flight conroller point of view, no need to hover at 50% exactly. That just for your feelling.

Is that under stabilization? The graph under tps?

[f5soh]

Vehicle tab

[Lone_droner]

Vehicle tab

Ok so I've located the throttle curve graph and the graph reads a linear line with the values at 0.00, 0.22, 0.45, 0.67 and 0.90 I don't know if that means anything to you. I'm still learning lol

[f5soh]

If you currently hover at 40% stick, you can change your throttle curve like bellow for same hover at 50% stick.