Throttle issue! Newbie help
« on: April 23, 2016, 12:37:48 am »
I recently built my first fpv quad it's a 180mm qav clone running cc3d and Librepilot with fs i6 radio. I can't adjust the stick setting so that it will begin to idle around 10% and begin to hover around %40. As of now I need at lease half stick or more to hover. Any help would be appreciated

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Throttle issue! Newbie help
« Reply #1 on: April 23, 2016, 12:46:42 am »
Hi, welcome.

Go to Vehicle tab and adjust the Throttle curve ?

From the flight conroller point of view, no need to hover at 50% exactly. That just for your feelling.

Re: Throttle issue! Newbie help
« Reply #2 on: April 23, 2016, 12:55:21 am »
Hi, welcome.

Go to Vehicle tab and adjust the Throttle curve ?

From the flight conroller point of view, no need to hover at 50% exactly. That just for your feelling.

Is that under stabilization? The graph under tps?

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Throttle issue! Newbie help
« Reply #3 on: April 23, 2016, 12:58:37 am »
Vehicle tab

Re: Throttle issue! Newbie help
« Reply #4 on: April 23, 2016, 01:07:05 am »
Vehicle tab

Ok so I've located the throttle curve graph and the graph reads a linear line with the values at 0.00, 0.22, 0.45, 0.67 and 0.90 I don't know if that means anything to you. I'm still learning lol

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Throttle issue! Newbie help
« Reply #5 on: April 23, 2016, 01:12:42 am »
If you currently hover at 40% stick, you can change your throttle curve like bellow for same hover at 50% stick.