« previous next »
Pages: [1]
*

zukenj

  • ***
  • 202
No Tx bars
« on: April 16, 2016, 03:21:17 pm »
After build last nigth, I connect the usb to the boar and the board boot, but get no sugnal in the tx, also at the bottom right I can see that it says usb:Revolution but no signal. I try rescue, but it comes back that the board can't enter DFU (I think) mode.

Sent from my SM-N900P using Tapatalk

Logged
FS-TH9X RC
F450 Clone
Revolution FC
EMAX 2213 935 KV
HK 30A ESC UBEC running BLHeli 14.4
10x4.5 Propellers
DJI Naza clone Ublox M8N GPS
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: No Tx bars
« Reply #1 on: April 16, 2016, 04:47:18 pm »
Board is always connected after you hit the button rescue

Board do a normal blinking ?
Logged
*

zukenj

  • ***
  • 202
Re: No Tx bars
« Reply #2 on: April 17, 2016, 04:24:00 am »
Thanks f5soh.

I was able to fix the issue. I did the Upgrade & Erase in version 15.09 and the run the Next branch and did the Upgrade & Erase, and now all is good.

 
Logged
FS-TH9X RC
F450 Clone
Revolution FC
EMAX 2213 935 KV
HK 30A ESC UBEC running BLHeli 14.4
10x4.5 Propellers
DJI Naza clone Ublox M8N GPS
Pages: [1]
« previous next »