[jaklos]

Looking at board diagrams it has 4 port connections and instructions call for adapter. Where do you find adapter?

[f5soh]

Not sure you can find spektrum adapters but you build your own or use 3.3v from board.

See this page:
https://librepilot.atlassian.net/wiki/display/LPDOC/Setup+a+Spektrum+Satellite

[jaklos]

So in other words by the time you get all the parts to build your adapter you should just use a ppm rx or a normal rx instead of trying to use the sat.  i would have thought that there would be support for a sat like on the older cc3d.

[f5soh]

All boards support DSM, you just need 3.3v. Can be directly from board.
https://librepilot.atlassian.net/wiki/display/LPDOC/Setup+a+Spektrum+Satellite#SetupaSpektrumSatellite-Poweredfromboard

[TheOtherCliff]

A note to pass along for others reading this thread.  We should have Sparky2 support in the coming release and it has a jumper on board to power the RC receiver from either input voltage (usually 5v or 6v from ESC's) or from 3.3v regulator on Sparky2.