Hello everyone. I need your help. I have a CC3D. I flashed it with CleanFlight, then stupidly I flashed it again with CC3D_OPBL using CF flasher. Then all the problems started. I only get a solid green light and can't communicate with the board or flash it using either the main port or even the USB port. I have tried flashing using CF, BF, GCS(all of them) and I also tried flashing the bootloader using STM Demonstrator. And NO I am not forgetting to short the SBL and 3.3V pins. I have attached some photos of my board. Whenever I try to flash it, it says, no response from the bootloader(or something similar). I have tried Naze32 (with BF, CF, and dronin) it is nowhere as good as CC3D with dronin. I can't afford a new one (if I could I wouldn't bother to write). I think I found something -
https://twitter.com/crennsmind/status/836538027988037632please can you help me find a solution? Thanks In Advance.