[Boxkite]

Help please, computer needs reboot after overnight shutdown to load USB copter control. Win10 cc3d atom. Shows com1 only.

Thanks

[hwh]

The boards don't use any driver other than the ones built into Windows.

Windows sometimes loads wrong drivers for a board.  If that's what happened the fix is at https://librepilot.atlassian.net/wiki/display/LPDOC/Troubleshooting    This may help even if the symptoms don't match exactly.

You might also try a different USB cable and a different USB port on the computer.

[Boxkite]

Thanks for that. I thought the driver was loaded by the cc3d. it is certainly not in the
driver list when the board is not connected.
Thanks