[Olz]

I was wondering if anybody had any idea why my CC3D controlled 210 quadcopter keeps falling out the sky. Its using a spektrum satellite receiver and a DX9. I have checked continuity and power supply to all components and all are fine. The control board is brand new (this problem also occurred when I used my old cc3d atom). It's almost as though the satellite receiver keeps going into failsafe mode. Any help would be much appreciated thanks!

[f5soh]

Hi, welcome.

Please post your config file:
File > Export UAV Settings while the board is connected.

[Olz]

Here is the file, thanks in advance for your help!

[f5soh]

This file shows nothing.

File > Export UAV Settings while the board is connected.
Is the board connected ?

[Olz]

I shall try the process again

[Olz]

Here it is, I am assuming I needed everything powered up.

[f5soh]

Same issue, this file is empty, or similar default settings after erase.
Connected mean the Hardware tab is displayed and you can see some activity in Flightdata tab / PFD.

[Olz]

Yeah everything is plugged in, I can see the gyro moving correctly and when I press export it says the file has been saved

[Olz]

Thats odd, i have just noticed that when i plug the cc3d back in all the settings are erased and all my esc calibration/setup has gone??!

[f5soh]

Assuming you are using 15.09, you can upgrade to lasted version, 16.09 - Black Rhino

[Olz]

I have been trying to re set all my settings but when using the wizard it keeps crashing and wont ever let me use a dsmx setting ( I know you can change this later on) But nothing seems to be working. The board is brand new

[f5soh]

How did you setup the board previously ?

[Olz]

I simply used the setup wizzard for the quadcopter and to bind the controller I used the inbuilt settings to set the reciever to bind when turned on. Once everything was setup i tired it on its first flight and it still fell out of the sky at random but frequent intervals