[AirPatoine]

I could use some advice.  I hooked up an APM power module to my Revolution FC according to the directions.  I am not getting any voltage or current data on the flight data screen  - none at the top or in the battery tab.  I am using a micro minim OSD and it is hooked up through the receiver port using the ppm+telemetry setting. 

What's interesting is that I get voltage readings on the OSD and have calibrated them.  I just don't get anything on my flight data screen.  It would be nice to have since I am using an OPlink.

I wonder if I am missing a setting somewhere?  In the guide it talks about ADC mapping, but doesn't say anything needs to be changed but ADC0 and ADC1.  Do other settings need to be changed?

Also, the battery alarm in the flight data screen is working properly.

Thanks in advance for any help.

[f5soh]

Your issue has nothing related to the current sensor config.

As you can see the PFD is not really normal if you compare with this one:


You simply need to reset the GCS config after you update to 16.09.
File > Import/Export GCS Settings > Reset config button and restart GCS
You will also find a "GCS (Clean config)" shortcut in Applications menu > Librepilot folder.
Be sure you removed the previous installation or installed in a different folder.

[AirPatoine]

Well that did the trick.  Thank you very much!